How to make hub motor reverse | Leafmotor

Q:Received my DIY e-bike kit,18" front wheel 48V 1000W hub motor with brushless motor controller,done installed on tricycle,test system,load 300pl on motor that still had enough power. But one issue:I want to make tricycle reverse,help... A:Please find a 2-pin connector(purple and black wires) from controller and jump these two wires,also can use a ON/OFF switch to control it. BTW,connect wires according as below connecting.Make a sample: 1.Forward. Motor -------- Controller Thick yellow wire -------- Thick yellow wire Thick green wire -------- Thick green wire Thick blue wire -------- Thick blue wire Motor hall -------- Controller hall Thin yellow wire -------- Thin yellow wire Thin green wire -------- Thin green wire Thin blue wire -------- Thin blue wire Thin red wire -------- Thin red wire Thin black wire -------- Thin black wire 2.Reverse. Exchange thick yellow and green wires and thin green and blue wires can make system backward. Motor -------- Controller Thick yellow wire ------- Thick green wire Thick green wire ------- Thick yellow wire Thick blue wire -------- Thick blue wire Motor hall -------- Controller hall Thin yellow wire -------- Thin yellow wire Thin green wire -------- Thin blue wire Thin blue wire -------- Thin green wire Thin red wire -------- Thin red wire Thin black wire -------- Thin black wire